arch/x86/include/asm/segment.h

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
get_limit
#ifndef _ASM_X86_SEGMENT_H
#define _ASM_X86_SEGMENT_H

#include <linux/const.h>

/* Constructor for a conventional segment GDT (or LDT) entry */
/* This is a macro so it can be used in initializers */
#define GDT_ENTRY(flags, base, limit)                   \
        ((((base)  & _AC(0xff000000,ULL)) << (56-24)) | \
         (((flags) & _AC(0x0000f0ff,ULL)) << 40) |      \
         (((limit) & _AC(0x000f0000,ULL)) << (48-16)) | \
         (((base)  & _AC(0x00ffffff,ULL)) << 16) |      \
         (((limit) & _AC(0x0000ffff,ULL))))

/* Simple and small GDT entries for booting only */

#define GDT_ENTRY_BOOT_CS       2
#define __BOOT_CS               (GDT_ENTRY_BOOT_CS * 8)

#define GDT_ENTRY_BOOT_DS       (GDT_ENTRY_BOOT_CS + 1)
#define __BOOT_DS               (GDT_ENTRY_BOOT_DS * 8)

#define GDT_ENTRY_BOOT_TSS      (GDT_ENTRY_BOOT_CS + 2)
#define __BOOT_TSS              (GDT_ENTRY_BOOT_TSS * 8)

#ifdef CONFIG_X86_32
/*
 * The layout of the per-CPU GDT under Linux:
 *
 *   0 - null
 *   1 - reserved
 *   2 - reserved
 *   3 - reserved
 *
 *   4 - unused                 <==== new cacheline
 *   5 - unused
 *
 *  ------- start of TLS (Thread-Local Storage) segments:
 *
 *   6 - TLS segment #1                 [ glibc's TLS segment ]
 *   7 - TLS segment #2                 [ Wine's %fs Win32 segment ]
 *   8 - TLS segment #3
 *   9 - reserved
 *  10 - reserved
 *  11 - reserved
 *
 *  ------- start of kernel segments:
 *
 *  12 - kernel code segment            <==== new cacheline
 *  13 - kernel data segment
 *  14 - default user CS
 *  15 - default user DS
 *  16 - TSS
 *  17 - LDT
 *  18 - PNPBIOS support (16->32 gate)
 *  19 - PNPBIOS support
 *  20 - PNPBIOS support
 *  21 - PNPBIOS support
 *  22 - PNPBIOS support
 *  23 - APM BIOS support
 *  24 - APM BIOS support
 *  25 - APM BIOS support
 *
 *  26 - ESPFIX small SS
 *  27 - per-cpu                        [ offset to per-cpu data area ]
 *  28 - stack_canary-20                [ for stack protector ]
 *  29 - unused
 *  30 - unused
 *  31 - TSS for double fault handler
 */
#define GDT_ENTRY_TLS_MIN       6
#define GDT_ENTRY_TLS_MAX       (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)

#define GDT_ENTRY_DEFAULT_USER_CS       14

#define GDT_ENTRY_DEFAULT_USER_DS       15

#define GDT_ENTRY_KERNEL_BASE           (12)

#define GDT_ENTRY_KERNEL_CS             (GDT_ENTRY_KERNEL_BASE+0)

#define GDT_ENTRY_KERNEL_DS             (GDT_ENTRY_KERNEL_BASE+1)

#define GDT_ENTRY_TSS                   (GDT_ENTRY_KERNEL_BASE+4)
#define GDT_ENTRY_LDT                   (GDT_ENTRY_KERNEL_BASE+5)

#define GDT_ENTRY_PNPBIOS_BASE          (GDT_ENTRY_KERNEL_BASE+6)
#define GDT_ENTRY_APMBIOS_BASE          (GDT_ENTRY_KERNEL_BASE+11)

#define GDT_ENTRY_ESPFIX_SS             (GDT_ENTRY_KERNEL_BASE+14)
#define __ESPFIX_SS                     (GDT_ENTRY_ESPFIX_SS*8)

#define GDT_ENTRY_PERCPU                (GDT_ENTRY_KERNEL_BASE+15)
#ifdef CONFIG_SMP
#define __KERNEL_PERCPU (GDT_ENTRY_PERCPU * 8)
#else
#define __KERNEL_PERCPU 0
#endif

#define GDT_ENTRY_STACK_CANARY          (GDT_ENTRY_KERNEL_BASE+16)
#ifdef CONFIG_CC_STACKPROTECTOR
#define __KERNEL_STACK_CANARY           (GDT_ENTRY_STACK_CANARY*8)
#else
#define __KERNEL_STACK_CANARY           0
#endif

#define GDT_ENTRY_DOUBLEFAULT_TSS       31

/*
 * The GDT has 32 entries
 */
#define GDT_ENTRIES 32

/* The PnP BIOS entries in the GDT */
#define GDT_ENTRY_PNPBIOS_CS32          (GDT_ENTRY_PNPBIOS_BASE + 0)
#define GDT_ENTRY_PNPBIOS_CS16          (GDT_ENTRY_PNPBIOS_BASE + 1)
#define GDT_ENTRY_PNPBIOS_DS            (GDT_ENTRY_PNPBIOS_BASE + 2)
#define GDT_ENTRY_PNPBIOS_TS1           (GDT_ENTRY_PNPBIOS_BASE + 3)
#define GDT_ENTRY_PNPBIOS_TS2           (GDT_ENTRY_PNPBIOS_BASE + 4)

/* The PnP BIOS selectors */
#define PNP_CS32   (GDT_ENTRY_PNPBIOS_CS32 * 8) /* segment for calling fn */
#define PNP_CS16   (GDT_ENTRY_PNPBIOS_CS16 * 8) /* code segment for BIOS */
#define PNP_DS     (GDT_ENTRY_PNPBIOS_DS * 8)   /* data segment for BIOS */
#define PNP_TS1    (GDT_ENTRY_PNPBIOS_TS1 * 8)  /* transfer data segment */
#define PNP_TS2    (GDT_ENTRY_PNPBIOS_TS2 * 8)  /* another data segment */

/* Bottom two bits of selector give the ring privilege level */
#define SEGMENT_RPL_MASK        0x3
/* Bit 2 is table indicator (LDT/GDT) */
#define SEGMENT_TI_MASK         0x4

/* User mode is privilege level 3 */
#define USER_RPL                0x3
/* LDT segment has TI set, GDT has it cleared */
#define SEGMENT_LDT             0x4
#define SEGMENT_GDT             0x0

/*
 * Matching rules for certain types of segments.
 */

/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */
#define SEGMENT_IS_PNP_CODE(x)   (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8)


#else
#include <asm/cache.h>

#define GDT_ENTRY_KERNEL32_CS 1
#define GDT_ENTRY_KERNEL_CS 2
#define GDT_ENTRY_KERNEL_DS 3

#define __KERNEL32_CS   (GDT_ENTRY_KERNEL32_CS * 8)

/*
 * we cannot use the same code segment descriptor for user and kernel
 * -- not even in the long flat mode, because of different DPL /kkeil
 * The segment offset needs to contain a RPL. Grr. -AK
 * GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)
 */
#define GDT_ENTRY_DEFAULT_USER32_CS 4
#define GDT_ENTRY_DEFAULT_USER_DS 5
#define GDT_ENTRY_DEFAULT_USER_CS 6
#define __USER32_CS   (GDT_ENTRY_DEFAULT_USER32_CS*8+3)
#define __USER32_DS     __USER_DS

#define GDT_ENTRY_TSS 8 /* needs two entries */
#define GDT_ENTRY_LDT 10 /* needs two entries */
#define GDT_ENTRY_TLS_MIN 12
#define GDT_ENTRY_TLS_MAX 14

#define GDT_ENTRY_PER_CPU 15    /* Abused to load per CPU data from limit */
#define __PER_CPU_SEG   (GDT_ENTRY_PER_CPU * 8 + 3)

/* TLS indexes for 64bit - hardcoded in arch_prctl */
#define FS_TLS 0
#define GS_TLS 1

#define GS_TLS_SEL ((GDT_ENTRY_TLS_MIN+GS_TLS)*8 + 3)
#define FS_TLS_SEL ((GDT_ENTRY_TLS_MIN+FS_TLS)*8 + 3)

#define GDT_ENTRIES 16

#endif

#define __KERNEL_CS     (GDT_ENTRY_KERNEL_CS*8)
#define __KERNEL_DS     (GDT_ENTRY_KERNEL_DS*8)
#define __USER_DS       (GDT_ENTRY_DEFAULT_USER_DS*8+3)
#define __USER_CS       (GDT_ENTRY_DEFAULT_USER_CS*8+3)
#ifndef CONFIG_PARAVIRT
#define get_kernel_rpl()  0
#endif

/* User mode is privilege level 3 */
#define USER_RPL                0x3
/* LDT segment has TI set, GDT has it cleared */
#define SEGMENT_LDT             0x4
#define SEGMENT_GDT             0x0

/* Bottom two bits of selector give the ring privilege level */
#define SEGMENT_RPL_MASK        0x3
/* Bit 2 is table indicator (LDT/GDT) */
#define SEGMENT_TI_MASK         0x4

#define IDT_ENTRIES 256
#define NUM_EXCEPTION_VECTORS 32
/* Bitmask of exception vectors which push an error code on the stack */
#define EXCEPTION_ERRCODE_MASK  0x00027d00
#define GDT_SIZE (GDT_ENTRIES * 8)
#define GDT_ENTRY_TLS_ENTRIES 3
#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)

#ifdef __KERNEL__
#ifndef __ASSEMBLY__
extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][2+2+5];
#ifdef CONFIG_TRACING
#define trace_early_idt_handlers early_idt_handlers
#endif

/*
 * Load a segment. Fall back on loading the zero
 * segment if something goes wrong..
 */
#define loadsegment(seg, value)                                         \
do {                                                                    \
        unsigned short __val = (value);                                 \
                                                                        \
        asm volatile("                                          \n"     \
                     "1:        movl %k0,%%" #seg "             \n"     \
                                                                        \
                     ".section .fixup,\"ax\"                    \n"     \
                     "2:        xorl %k0,%k0                    \n"     \
                     "          jmp 1b                          \n"     \
                     ".previous                                 \n"     \
                                                                        \
                     _ASM_EXTABLE(1b, 2b)                               \
                                                                        \
                     : "+r" (__val) : : "memory");                      \
} while (0)

/*
 * Save a segment register away
 */
#define savesegment(seg, value)                         \
        asm("mov %%" #seg ",%0":"=r" (value) : : "memory")

/*
 * x86_32 user gs accessors.
 */
#ifdef CONFIG_X86_32
#ifdef CONFIG_X86_32_LAZY_GS
#define get_user_gs(regs)       (u16)({unsigned long v; savesegment(gs, v); v;})
#define set_user_gs(regs, v)    loadsegment(gs, (unsigned long)(v))
#define task_user_gs(tsk)       ((tsk)->thread.gs)
#define lazy_save_gs(v)         savesegment(gs, (v))
#define lazy_load_gs(v)         loadsegment(gs, (v))
#else   /* X86_32_LAZY_GS */
#define get_user_gs(regs)       (u16)((regs)->gs)
#define set_user_gs(regs, v)    do { (regs)->gs = (v); } while (0)
#define task_user_gs(tsk)       (task_pt_regs(tsk)->gs)
#define lazy_save_gs(v)         do { } while (0)
#define lazy_load_gs(v)         do { } while (0)
#endif  /* X86_32_LAZY_GS */
#endif  /* X86_32 */

static inline unsigned long get_limit(unsigned long segment)
{
        unsigned long __limit;
        asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
        return __limit + 1;
}

#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */

#endif /* _ASM_X86_SEGMENT_H */
/* [<][>][^][v][top][bottom][index][help] */
root/arch/x86/include/asm/segment.h

INCLUDED FROM

DEFINITIONS
