root/include/linux/i2c-algo-pca.h

/* [<][>][^][v][top][bottom][index][help] */
#ifndef _LINUX_I2C_ALGO_PCA_H
#define _LINUX_I2C_ALGO_PCA_H

/* Chips known to the pca algo */
#define I2C_PCA_CHIP_9564       0x00
#define I2C_PCA_CHIP_9665       0x01

/* Internal period for PCA9665 oscilator */
#define I2C_PCA_OSC_PER         3 /* e10-8s */

/* Clock speeds for the bus for PCA9564*/
#define I2C_PCA_CON_330kHz      0x00
#define I2C_PCA_CON_288kHz      0x01
#define I2C_PCA_CON_217kHz      0x02
#define I2C_PCA_CON_146kHz      0x03
#define I2C_PCA_CON_88kHz       0x04
#define I2C_PCA_CON_59kHz       0x05
#define I2C_PCA_CON_44kHz       0x06
#define I2C_PCA_CON_36kHz       0x07

/* PCA9564 registers */
#define I2C_PCA_STA             0x00 /* STATUS  Read Only  */
#define I2C_PCA_TO              0x00 /* TIMEOUT Write Only */
#define I2C_PCA_DAT             0x01 /* DATA    Read/Write */
#define I2C_PCA_ADR             0x02 /* OWN ADR Read/Write */
#define I2C_PCA_CON             0x03 /* CONTROL Read/Write */

/* PCA9665 registers */
#define I2C_PCA_INDPTR          0x00 /* INDIRECT Pointer Write Only */
#define I2C_PCA_IND             0x02 /* INDIRECT Read/Write */

/* PCA9665 indirect registers */
#define I2C_PCA_ICOUNT          0x00 /* Byte Count for buffered mode */
#define I2C_PCA_IADR            0x01 /* OWN ADR */
#define I2C_PCA_ISCLL           0x02 /* SCL LOW period */
#define I2C_PCA_ISCLH           0x03 /* SCL HIGH period */
#define I2C_PCA_ITO             0x04 /* TIMEOUT */
#define I2C_PCA_IPRESET         0x05 /* Parallel bus reset */
#define I2C_PCA_IMODE           0x06 /* I2C Bus mode */

/* PCA9665 I2C bus mode */
#define I2C_PCA_MODE_STD        0x00 /* Standard mode */
#define I2C_PCA_MODE_FAST       0x01 /* Fast mode */
#define I2C_PCA_MODE_FASTP      0x02 /* Fast Plus mode */
#define I2C_PCA_MODE_TURBO      0x03 /* Turbo mode */


#define I2C_PCA_CON_AA          0x80 /* Assert Acknowledge */
#define I2C_PCA_CON_ENSIO       0x40 /* Enable */
#define I2C_PCA_CON_STA         0x20 /* Start */
#define I2C_PCA_CON_STO         0x10 /* Stop */
#define I2C_PCA_CON_SI          0x08 /* Serial Interrupt */
#define I2C_PCA_CON_CR          0x07 /* Clock Rate (MASK) */

struct i2c_algo_pca_data {
        void                            *data;  /* private low level data */
        void (*write_byte)              (void *data, int reg, int val);
        int  (*read_byte)               (void *data, int reg);
        int  (*wait_for_completion)     (void *data);
        void (*reset_chip)              (void *data);
        /* For PCA9564, use one of the predefined frequencies:
         * 330000, 288000, 217000, 146000, 88000, 59000, 44000, 36000
         * For PCA9665, use the frequency you want here. */
        unsigned int                    i2c_clock;
        unsigned int                    chip;
};

int i2c_pca_add_bus(struct i2c_adapter *);
int i2c_pca_add_numbered_bus(struct i2c_adapter *);

#endif /* _LINUX_I2C_ALGO_PCA_H */

/* [<][>][^][v][top][bottom][index][help] */