root/include/linux/ssb/ssb_driver_pci.h

INCLUDED FROM

DEFINITIONS

1. ssb_pcicore_init
2. ssb_pcicore_dev_irqvecs_enable
3. ssb_pcicore_plat_dev_init
4. ssb_pcicore_pcibios_map_irq

#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_

#include <linux/types.h>

struct pci_dev;


#ifdef CONFIG_SSB_DRIVER_PCICORE

/* PCI core registers. */
#define SSB_PCICORE_CTL                 0x0000  /* PCI Control */
#define  SSB_PCICORE_CTL_RST_OE         0x00000001 /* PCI_RESET Output Enable */
#define  SSB_PCICORE_CTL_RST            0x00000002 /* PCI_RESET driven out to pin */
#define  SSB_PCICORE_CTL_CLK_OE         0x00000004 /* Clock gate Output Enable */
#define  SSB_PCICORE_CTL_CLK            0x00000008 /* Gate for clock driven out to pin */
#define SSB_PCICORE_ARBCTL              0x0010  /* PCI Arbiter Control */
#define  SSB_PCICORE_ARBCTL_INTERN      0x00000001 /* Use internal arbiter */
#define  SSB_PCICORE_ARBCTL_EXTERN      0x00000002 /* Use external arbiter */
#define  SSB_PCICORE_ARBCTL_PARKID      0x00000006 /* Mask, selects which agent is parked on an idle bus */
#define   SSB_PCICORE_ARBCTL_PARKID_LAST        0x00000000 /* Last requestor */
#define   SSB_PCICORE_ARBCTL_PARKID_4710        0x00000002 /* 4710 */
#define   SSB_PCICORE_ARBCTL_PARKID_EXT0        0x00000004 /* External requestor 0 */
#define   SSB_PCICORE_ARBCTL_PARKID_EXT1        0x00000006 /* External requestor 1 */
#define SSB_PCICORE_ISTAT               0x0020  /* Interrupt status */
#define  SSB_PCICORE_ISTAT_INTA         0x00000001 /* PCI INTA# */
#define  SSB_PCICORE_ISTAT_INTB         0x00000002 /* PCI INTB# */
#define  SSB_PCICORE_ISTAT_SERR         0x00000004 /* PCI SERR# (write to clear) */
#define  SSB_PCICORE_ISTAT_PERR         0x00000008 /* PCI PERR# (write to clear) */
#define  SSB_PCICORE_ISTAT_PME          0x00000010 /* PCI PME# */
#define SSB_PCICORE_IMASK               0x0024  /* Interrupt mask */
#define  SSB_PCICORE_IMASK_INTA         0x00000001 /* PCI INTA# */
#define  SSB_PCICORE_IMASK_INTB         0x00000002 /* PCI INTB# */
#define  SSB_PCICORE_IMASK_SERR         0x00000004 /* PCI SERR# */
#define  SSB_PCICORE_IMASK_PERR         0x00000008 /* PCI PERR# */
#define  SSB_PCICORE_IMASK_PME          0x00000010 /* PCI PME# */
#define SSB_PCICORE_MBOX                0x0028  /* Backplane to PCI Mailbox */
#define  SSB_PCICORE_MBOX_F0_0          0x00000100 /* PCI function 0, INT 0 */
#define  SSB_PCICORE_MBOX_F0_1          0x00000200 /* PCI function 0, INT 1 */
#define  SSB_PCICORE_MBOX_F1_0          0x00000400 /* PCI function 1, INT 0 */
#define  SSB_PCICORE_MBOX_F1_1          0x00000800 /* PCI function 1, INT 1 */
#define  SSB_PCICORE_MBOX_F2_0          0x00001000 /* PCI function 2, INT 0 */
#define  SSB_PCICORE_MBOX_F2_1          0x00002000 /* PCI function 2, INT 1 */
#define  SSB_PCICORE_MBOX_F3_0          0x00004000 /* PCI function 3, INT 0 */
#define  SSB_PCICORE_MBOX_F3_1          0x00008000 /* PCI function 3, INT 1 */
#define SSB_PCICORE_BCAST_ADDR          0x0050  /* Backplane Broadcast Address */
#define  SSB_PCICORE_BCAST_ADDR_MASK    0x000000FF
#define SSB_PCICORE_BCAST_DATA          0x0054  /* Backplane Broadcast Data */
#define SSB_PCICORE_GPIO_IN             0x0060  /* rev >= 2 only */
#define SSB_PCICORE_GPIO_OUT            0x0064  /* rev >= 2 only */
#define SSB_PCICORE_GPIO_ENABLE         0x0068  /* rev >= 2 only */
#define SSB_PCICORE_GPIO_CTL            0x006C  /* rev >= 2 only */
#define SSB_PCICORE_SBTOPCI0            0x0100  /* Backplane to PCI translation 0 (sbtopci0) */
#define  SSB_PCICORE_SBTOPCI0_MASK      0xFC000000
#define SSB_PCICORE_SBTOPCI1            0x0104  /* Backplane to PCI translation 1 (sbtopci1) */
#define  SSB_PCICORE_SBTOPCI1_MASK      0xFC000000
#define SSB_PCICORE_SBTOPCI2            0x0108  /* Backplane to PCI translation 2 (sbtopci2) */
#define  SSB_PCICORE_SBTOPCI2_MASK      0xC0000000
#define SSB_PCICORE_PCICFG0             0x0400  /* PCI config space 0 (rev >= 8) */
#define SSB_PCICORE_PCICFG1             0x0500  /* PCI config space 1 (rev >= 8) */
#define SSB_PCICORE_PCICFG2             0x0600  /* PCI config space 2 (rev >= 8) */
#define SSB_PCICORE_PCICFG3             0x0700  /* PCI config space 3 (rev >= 8) */
#define SSB_PCICORE_SPROM(wordoffset)   (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */

/* SBtoPCIx */
#define SSB_PCICORE_SBTOPCI_MEM         0x00000000
#define SSB_PCICORE_SBTOPCI_IO          0x00000001
#define SSB_PCICORE_SBTOPCI_CFG0        0x00000002
#define SSB_PCICORE_SBTOPCI_CFG1        0x00000003
#define SSB_PCICORE_SBTOPCI_PREF        0x00000004 /* Prefetch enable */
#define SSB_PCICORE_SBTOPCI_BURST       0x00000008 /* Burst enable */
#define SSB_PCICORE_SBTOPCI_MRM         0x00000020 /* Memory Read Multiple */
#define SSB_PCICORE_SBTOPCI_RC          0x00000030 /* Read Command mask (rev >= 11) */
#define  SSB_PCICORE_SBTOPCI_RC_READ    0x00000000 /* Memory read */
#define  SSB_PCICORE_SBTOPCI_RC_READL   0x00000010 /* Memory read line */
#define  SSB_PCICORE_SBTOPCI_RC_READM   0x00000020 /* Memory read multiple */


/* PCIcore specific boardflags */
#define SSB_PCICORE_BFL_NOPCI           0x00000400 /* Board leaves PCI floating */


struct ssb_pcicore {
        struct ssb_device *dev;
        u8 setup_done:1;
        u8 hostmode:1;
        u8 cardbusmode:1;
};

extern void ssb_pcicore_init(struct ssb_pcicore *pc);

/* Enable IRQ routing for a specific device */
extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
                                          struct ssb_device *dev);

int ssb_pcicore_plat_dev_init(struct pci_dev *d);
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);


#else /* CONFIG_SSB_DRIVER_PCICORE */


struct ssb_pcicore {
};

static inline
void ssb_pcicore_init(struct ssb_pcicore *pc)
{
}

static inline
int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
                                   struct ssb_device *dev)
{
        return 0;
}

static inline
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
        return -ENODEV;
}
static inline
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
        return -ENODEV;
}

#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */