root/include/linux/ucb1400.h

DEFINITIONS

1. ucb1400_reg_read
2. ucb1400_reg_write
3. ucb1400_gpio_get_value
4. ucb1400_gpio_set_value
5. ucb1400_gpio_get_direction
6. ucb1400_gpio_set_direction
7. ucb1400_adc_enable
8. ucb1400_adc_disable

/*
 * Register definitions and functions for:
 *  Philips UCB1400 driver
 *
 * Based on ucb1400_ts:
 *  Author:     Nicolas Pitre
 *  Created:    September 25, 2006
 *  Copyright:  MontaVista Software, Inc.
 *
 * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
 * If something doesn't work and it worked before spliting, e-mail me,
 * dont bother Nicolas please ;-)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
 * covering the UCB1100, UCB1200 and UCB1300..  Support for the UCB1400 has
 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
 */

#ifndef _LINUX__UCB1400_H
#define _LINUX__UCB1400_H

#include <sound/ac97_codec.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>

/*
 * UCB1400 AC-link registers
 */

#define UCB_IO_DATA             0x5a
#define UCB_IO_DIR              0x5c
#define UCB_IE_RIS              0x5e
#define UCB_IE_FAL              0x60
#define UCB_IE_STATUS           0x62
#define UCB_IE_CLEAR            0x62
#define UCB_IE_ADC              (1 << 11)
#define UCB_IE_TSPX             (1 << 12)

#define UCB_TS_CR               0x64
#define UCB_TS_CR_TSMX_POW      (1 << 0)
#define UCB_TS_CR_TSPX_POW      (1 << 1)
#define UCB_TS_CR_TSMY_POW      (1 << 2)
#define UCB_TS_CR_TSPY_POW      (1 << 3)
#define UCB_TS_CR_TSMX_GND      (1 << 4)
#define UCB_TS_CR_TSPX_GND      (1 << 5)
#define UCB_TS_CR_TSMY_GND      (1 << 6)
#define UCB_TS_CR_TSPY_GND      (1 << 7)
#define UCB_TS_CR_MODE_INT      (0 << 8)
#define UCB_TS_CR_MODE_PRES     (1 << 8)
#define UCB_TS_CR_MODE_POS      (2 << 8)
#define UCB_TS_CR_BIAS_ENA      (1 << 11)
#define UCB_TS_CR_TSPX_LOW      (1 << 12)
#define UCB_TS_CR_TSMX_LOW      (1 << 13)

#define UCB_ADC_CR              0x66
#define UCB_ADC_SYNC_ENA        (1 << 0)
#define UCB_ADC_VREFBYP_CON     (1 << 1)
#define UCB_ADC_INP_TSPX        (0 << 2)
#define UCB_ADC_INP_TSMX        (1 << 2)
#define UCB_ADC_INP_TSPY        (2 << 2)
#define UCB_ADC_INP_TSMY        (3 << 2)
#define UCB_ADC_INP_AD0         (4 << 2)
#define UCB_ADC_INP_AD1         (5 << 2)
#define UCB_ADC_INP_AD2         (6 << 2)
#define UCB_ADC_INP_AD3         (7 << 2)
#define UCB_ADC_EXT_REF         (1 << 5)
#define UCB_ADC_START           (1 << 7)
#define UCB_ADC_ENA             (1 << 15)

#define UCB_ADC_DATA            0x68
#define UCB_ADC_DAT_VALID       (1 << 15)

#define UCB_FCSR                0x6c
#define UCB_FCSR_AVE            (1 << 12)

#define UCB_ADC_DAT_MASK        0x3ff

#define UCB_ID                  0x7e
#define UCB_ID_1400             0x4304

struct ucb1400_gpio {
        struct gpio_chip        gc;
        struct snd_ac97         *ac97;
        int                     gpio_offset;
        int                     (*gpio_setup)(struct device *dev, int ngpio);
        int                     (*gpio_teardown)(struct device *dev, int ngpio);
};

struct ucb1400_ts {
        struct input_dev        *ts_idev;
        int                     id;
        int                     irq;
        struct snd_ac97         *ac97;
        wait_queue_head_t       ts_wait;
        bool                    stopped;
};

struct ucb1400 {
        struct platform_device  *ucb1400_ts;
        struct platform_device  *ucb1400_gpio;
};

struct ucb1400_pdata {
        int     irq;
        int     gpio_offset;
        int     (*gpio_setup)(struct device *dev, int ngpio);
        int     (*gpio_teardown)(struct device *dev, int ngpio);
};

static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
{
        return ac97->bus->ops->read(ac97, reg);
}

static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
{
        ac97->bus->ops->write(ac97, reg, val);
}

static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
{
        return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
}

static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
                                                u16 val)
{
        ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
                        ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
                        ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
}

static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
{
        return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
}

static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
                                                u16 dir)
{
        ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
                        ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
                        ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
}

static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
{
        ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
}

static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
{
        ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
}


unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
                              int adcsync);

#endif