root/include/linux/mii.h

INCLUDED FROM

DEFINITIONS

1. if_mii
2. mii_nway_result
3. mii_duplex
4. ethtool_adv_to_mii_adv_t
5. mii_adv_to_ethtool_adv_t
6. ethtool_adv_to_mii_ctrl1000_t
7. mii_ctrl1000_to_ethtool_adv_t
8. mii_lpa_to_ethtool_lpa_t
9. mii_stat1000_to_ethtool_lpa_t
10. ethtool_adv_to_mii_adv_x
11. mii_adv_to_ethtool_adv_x
12. mii_lpa_to_ethtool_lpa_x
13. mii_advertise_flowctrl
14. mii_resolve_flowctrl_fdx

/*
 * linux/mii.h: definitions for MII-compatible transceivers
 * Originally drivers/net/sunhme.h.
 *
 * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
 */
#ifndef __LINUX_MII_H__
#define __LINUX_MII_H__


#include <linux/if.h>
#include <uapi/linux/mii.h>

struct ethtool_cmd;

struct mii_if_info {
        int phy_id;
        int advertising;
        int phy_id_mask;
        int reg_num_mask;

        unsigned int full_duplex : 1;   /* is full duplex? */
        unsigned int force_media : 1;   /* is autoneg. disabled? */
        unsigned int supports_gmii : 1; /* are GMII registers supported? */

        struct net_device *dev;
        int (*mdio_read) (struct net_device *dev, int phy_id, int location);
        void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
};

extern int mii_link_ok (struct mii_if_info *mii);
extern int mii_nway_restart (struct mii_if_info *mii);
extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
extern int mii_check_gmii_support(struct mii_if_info *mii);
extern void mii_check_link (struct mii_if_info *mii);
extern unsigned int mii_check_media (struct mii_if_info *mii,
                                     unsigned int ok_to_print,
                                     unsigned int init_media);
extern int generic_mii_ioctl(struct mii_if_info *mii_if,
                             struct mii_ioctl_data *mii_data, int cmd,
                             unsigned int *duplex_changed);


static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
{
        return (struct mii_ioctl_data *) &rq->ifr_ifru;
}

/**
 * mii_nway_result
 * @negotiated: value of MII ANAR and'd with ANLPAR
 *
 * Given a set of MII abilities, check each bit and returns the
 * currently supported media, in the priority order defined by
 * IEEE 802.3u.  We use LPA_xxx constants but note this is not the
 * value of LPA solely, as described above.
 *
 * The one exception to IEEE 802.3u is that 100baseT4 is placed
 * between 100T-full and 100T-half.  If your phy does not support
 * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
 * priority order, you will need to roll your own function.
 */
static inline unsigned int mii_nway_result (unsigned int negotiated)
{
        unsigned int ret;

        if (negotiated & LPA_100FULL)
                ret = LPA_100FULL;
        else if (negotiated & LPA_100BASE4)
                ret = LPA_100BASE4;
        else if (negotiated & LPA_100HALF)
                ret = LPA_100HALF;
        else if (negotiated & LPA_10FULL)
                ret = LPA_10FULL;
        else
                ret = LPA_10HALF;

        return ret;
}

/**
 * mii_duplex
 * @duplex_lock: Non-zero if duplex is locked at full
 * @negotiated: value of MII ANAR and'd with ANLPAR
 *
 * A small helper function for a common case.  Returns one
 * if the media is operating or locked at full duplex, and
 * returns zero otherwise.
 */
static inline unsigned int mii_duplex (unsigned int duplex_lock,
                                       unsigned int negotiated)
{
        if (duplex_lock)
                return 1;
        if (mii_nway_result(negotiated) & LPA_DUPLEX)
                return 1;
        return 0;
}

/**
 * ethtool_adv_to_mii_adv_t
 * @ethadv: the ethtool advertisement settings
 *
 * A small helper function that translates ethtool advertisement
 * settings to phy autonegotiation advertisements for the
 * MII_ADVERTISE register.
 */
static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
{
        u32 result = 0;

        if (ethadv & ADVERTISED_10baseT_Half)
                result |= ADVERTISE_10HALF;
        if (ethadv & ADVERTISED_10baseT_Full)
                result |= ADVERTISE_10FULL;
        if (ethadv & ADVERTISED_100baseT_Half)
                result |= ADVERTISE_100HALF;
        if (ethadv & ADVERTISED_100baseT_Full)
                result |= ADVERTISE_100FULL;
        if (ethadv & ADVERTISED_Pause)
                result |= ADVERTISE_PAUSE_CAP;
        if (ethadv & ADVERTISED_Asym_Pause)
                result |= ADVERTISE_PAUSE_ASYM;

        return result;
}

/**
 * mii_adv_to_ethtool_adv_t
 * @adv: value of the MII_ADVERTISE register
 *
 * A small helper function that translates MII_ADVERTISE bits
 * to ethtool advertisement settings.
 */
static inline u32 mii_adv_to_ethtool_adv_t(u32 adv)
{
        u32 result = 0;

        if (adv & ADVERTISE_10HALF)
                result |= ADVERTISED_10baseT_Half;
        if (adv & ADVERTISE_10FULL)
                result |= ADVERTISED_10baseT_Full;
        if (adv & ADVERTISE_100HALF)
                result |= ADVERTISED_100baseT_Half;
        if (adv & ADVERTISE_100FULL)
                result |= ADVERTISED_100baseT_Full;
        if (adv & ADVERTISE_PAUSE_CAP)
                result |= ADVERTISED_Pause;
        if (adv & ADVERTISE_PAUSE_ASYM)
                result |= ADVERTISED_Asym_Pause;

        return result;
}

/**
 * ethtool_adv_to_mii_ctrl1000_t
 * @ethadv: the ethtool advertisement settings
 *
 * A small helper function that translates ethtool advertisement
 * settings to phy autonegotiation advertisements for the
 * MII_CTRL1000 register when in 1000T mode.
 */
static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
{
        u32 result = 0;

        if (ethadv & ADVERTISED_1000baseT_Half)
                result |= ADVERTISE_1000HALF;
        if (ethadv & ADVERTISED_1000baseT_Full)
                result |= ADVERTISE_1000FULL;

        return result;
}

/**
 * mii_ctrl1000_to_ethtool_adv_t
 * @adv: value of the MII_CTRL1000 register
 *
 * A small helper function that translates MII_CTRL1000
 * bits, when in 1000Base-T mode, to ethtool
 * advertisement settings.
 */
static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv)
{
        u32 result = 0;

        if (adv & ADVERTISE_1000HALF)
                result |= ADVERTISED_1000baseT_Half;
        if (adv & ADVERTISE_1000FULL)
                result |= ADVERTISED_1000baseT_Full;

        return result;
}

/**
 * mii_lpa_to_ethtool_lpa_t
 * @adv: value of the MII_LPA register
 *
 * A small helper function that translates MII_LPA
 * bits, when in 1000Base-T mode, to ethtool
 * LP advertisement settings.
 */
static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa)
{
        u32 result = 0;

        if (lpa & LPA_LPACK)
                result |= ADVERTISED_Autoneg;

        return result | mii_adv_to_ethtool_adv_t(lpa);
}

/**
 * mii_stat1000_to_ethtool_lpa_t
 * @adv: value of the MII_STAT1000 register
 *
 * A small helper function that translates MII_STAT1000
 * bits, when in 1000Base-T mode, to ethtool
 * advertisement settings.
 */
static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa)
{
        u32 result = 0;

        if (lpa & LPA_1000HALF)
                result |= ADVERTISED_1000baseT_Half;
        if (lpa & LPA_1000FULL)
                result |= ADVERTISED_1000baseT_Full;

        return result;
}

/**
 * ethtool_adv_to_mii_adv_x
 * @ethadv: the ethtool advertisement settings
 *
 * A small helper function that translates ethtool advertisement
 * settings to phy autonegotiation advertisements for the
 * MII_CTRL1000 register when in 1000Base-X mode.
 */
static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv)
{
        u32 result = 0;

        if (ethadv & ADVERTISED_1000baseT_Half)
                result |= ADVERTISE_1000XHALF;
        if (ethadv & ADVERTISED_1000baseT_Full)
                result |= ADVERTISE_1000XFULL;
        if (ethadv & ADVERTISED_Pause)
                result |= ADVERTISE_1000XPAUSE;
        if (ethadv & ADVERTISED_Asym_Pause)
                result |= ADVERTISE_1000XPSE_ASYM;

        return result;
}

/**
 * mii_adv_to_ethtool_adv_x
 * @adv: value of the MII_CTRL1000 register
 *
 * A small helper function that translates MII_CTRL1000
 * bits, when in 1000Base-X mode, to ethtool
 * advertisement settings.
 */
static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
{
        u32 result = 0;

        if (adv & ADVERTISE_1000XHALF)
                result |= ADVERTISED_1000baseT_Half;
        if (adv & ADVERTISE_1000XFULL)
                result |= ADVERTISED_1000baseT_Full;
        if (adv & ADVERTISE_1000XPAUSE)
                result |= ADVERTISED_Pause;
        if (adv & ADVERTISE_1000XPSE_ASYM)
                result |= ADVERTISED_Asym_Pause;

        return result;
}

/**
 * mii_lpa_to_ethtool_lpa_x
 * @adv: value of the MII_LPA register
 *
 * A small helper function that translates MII_LPA
 * bits, when in 1000Base-X mode, to ethtool
 * LP advertisement settings.
 */
static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
{
        u32 result = 0;

        if (lpa & LPA_LPACK)
                result |= ADVERTISED_Autoneg;

        return result | mii_adv_to_ethtool_adv_x(lpa);
}

/**
 * mii_advertise_flowctrl - get flow control advertisement flags
 * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
 */
static inline u16 mii_advertise_flowctrl(int cap)
{
        u16 adv = 0;

        if (cap & FLOW_CTRL_RX)
                adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
        if (cap & FLOW_CTRL_TX)
                adv ^= ADVERTISE_PAUSE_ASYM;

        return adv;
}

/**
 * mii_resolve_flowctrl_fdx
 * @lcladv: value of MII ADVERTISE register
 * @rmtadv: value of MII LPA register
 *
 * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
 */
static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
{
        u8 cap = 0;

        if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
                cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
        } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
                if (lcladv & ADVERTISE_PAUSE_CAP)
                        cap = FLOW_CTRL_RX;
                else if (rmtadv & ADVERTISE_PAUSE_CAP)
                        cap = FLOW_CTRL_TX;
        }

        return cap;
}

#endif /* __LINUX_MII_H__ */