/*
* max77686.h - Driver for the Maxim 77686/802
*
* Copyright (C) 2012 Samsung Electrnoics
* Chiwoong Byun <woong.byun@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This driver is based on max8997.h
*
* MAX77686 has PMIC, RTC devices.
* The devices share the same I2C bus and included in
* this mfd driver.
*/
#ifndef __LINUX_MFD_MAX77686_H
#define __LINUX_MFD_MAX77686_H
#include <linux/regulator/consumer.h>
/* MAX77686 regulator IDs */
enum max77686_regulators {
MAX77686_LDO1 = 0,
MAX77686_LDO2,
MAX77686_LDO3,
MAX77686_LDO4,
MAX77686_LDO5,
MAX77686_LDO6,
MAX77686_LDO7,
MAX77686_LDO8,
MAX77686_LDO9,
MAX77686_LDO10,
MAX77686_LDO11,
MAX77686_LDO12,
MAX77686_LDO13,
MAX77686_LDO14,
MAX77686_LDO15,
MAX77686_LDO16,
MAX77686_LDO17,
MAX77686_LDO18,
MAX77686_LDO19,
MAX77686_LDO20,
MAX77686_LDO21,
MAX77686_LDO22,
MAX77686_LDO23,
MAX77686_LDO24,
MAX77686_LDO25,
MAX77686_LDO26,
MAX77686_BUCK1,
MAX77686_BUCK2,
MAX77686_BUCK3,
MAX77686_BUCK4,
MAX77686_BUCK5,
MAX77686_BUCK6,
MAX77686_BUCK7,
MAX77686_BUCK8,
MAX77686_BUCK9,
MAX77686_REG_MAX,
};
/* MAX77802 regulator IDs */
enum max77802_regulators {
MAX77802_BUCK1 = 0,
MAX77802_BUCK2,
MAX77802_BUCK3,
MAX77802_BUCK4,
MAX77802_BUCK5,
MAX77802_BUCK6,
MAX77802_BUCK7,
MAX77802_BUCK8,
MAX77802_BUCK9,
MAX77802_BUCK10,
MAX77802_LDO1,
MAX77802_LDO2,
MAX77802_LDO3,
MAX77802_LDO4,
MAX77802_LDO5,
MAX77802_LDO6,
MAX77802_LDO7,
MAX77802_LDO8,
MAX77802_LDO9,
MAX77802_LDO10,
MAX77802_LDO11,
MAX77802_LDO12,
MAX77802_LDO13,
MAX77802_LDO14,
MAX77802_LDO15,
MAX77802_LDO17,
MAX77802_LDO18,
MAX77802_LDO19,
MAX77802_LDO20,
MAX77802_LDO21,
MAX77802_LDO23,
MAX77802_LDO24,
MAX77802_LDO25,
MAX77802_LDO26,
MAX77802_LDO27,
MAX77802_LDO28,
MAX77802_LDO29,
MAX77802_LDO30,
MAX77802_LDO32,
MAX77802_LDO33,
MAX77802_LDO34,
MAX77802_LDO35,
MAX77802_REG_MAX,
};
struct max77686_regulator_data {
int id;
struct regulator_init_data *initdata;
struct device_node *of_node;
};
enum max77686_opmode {
MAX77686_OPMODE_NORMAL,
MAX77686_OPMODE_LP,
MAX77686_OPMODE_STANDBY,
};
enum max77802_opmode {
MAX77802_OPMODE_OFF,
MAX77802_OPMODE_STANDBY,
MAX77802_OPMODE_LP,
MAX77802_OPMODE_NORMAL,
};
struct max77686_opmode_data {
int id;
int mode;
};
struct max77686_platform_data {
int ono;
int wakeup;
/* ---- PMIC ---- */
struct max77686_regulator_data *regulators;
int num_regulators;
struct max77686_opmode_data *opmode_data;
/*
* GPIO-DVS feature is not enabled with the current version of
* MAX77686 driver. Buck2/3/4_voltages[0] is used as the default
* voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW.
*/
int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */
int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */
unsigned int buck2_voltage[8]; /* buckx_voltage in uV */
unsigned int buck3_voltage[8];
unsigned int buck4_voltage[8];
};
#endif /* __LINUX_MFD_MAX77686_H */